Beginner Sliding Laptop Shelf For Openbuilds Table

Machine Type:

OpenBuilds LEAD Machine

Materials:

1/2" MDF, V-slot, gantry kit plate, 3d printed mounts.

I built a 1510 table for my LEAD machine and wanted both an additional support beam for the table top and a pull out platform for my workshop computer. Two V-slot gantry plate kits and a 3d printed shelf mount provide a stable sliding system. The 3d printed mounts press onto the edges of the gantry plate (printed from PLA+ with 3 shells and 50% infill) and screws into the sides of the 1/2" thick MDF shelf hold it all together.

To roll the shelf you will need:
(2) V-Slot Gantry Kit - 20mm

To add an additional support to a 1510 table you will need:

(1) 20x60 V-Slot at 1680mm length (color of your table)
(4) 60mm Inside-out brackets
(28) M5 x 8mm Screws (these are in 10 packs on the store)
(4) Single L brackets
(4) MDF Screws