Beginner Reusable Mdf Stamps - Holiday Edition

Software:

Vectric Aspire / Openbuilds CAM

Machine Time:

About an hour for all of them

Bit or Laser Size:

1/8" Flat endmill & v90 v-bit

Materials:

1/2" MDF
Poly

​

I have made stamps in the past with linoleum but i asked myself if an MDF stamp would work. After some playing around i got what i wanted.

Attached you will find vector files so you can generate your own code and the gcode from vectric, this is for v90 bit, 50mmx50mm blank and it will not go any further than 3mm, so 1/4 MDF could also work.