Intermediate Rod's Display Stand

Machine Type:

OpenBuilds LEAD Machine

Software:

LightBurn, Fusion 360, Openbuilds Control

Electronics:

Other Controller

Machine Time:

2 hours

Bit or Laser Size:

1/4 inch Flat End Mill

Feeds & Speeds:

1800mm/min 3mm DOC

Materials:

Starboard HDPE Plastic and 1/2 inch Acrylic

Render

So here's a display stand that I've been working on for about a week, its decked out with with speakers, a monitor, batteries, low voltage controllers, and chargers, and a bunch more. It's made out of a material that I've never used before called Starboard, or HDPE Marine board. Its very very machinable and really just a pleasure to work with. The stand has a pretty cool acrylic sign on the top that the LEDs shine through for a cool effect. I used the 40 watt laser to etch the 1/2 inch acrylic at only 9% power. The Starboard was broken down on the table saw and then machined on the LEAD CNC. Be Careful to wear a respirator, the Starboard will give you a sore throat... ask me how I know. lol


Please follow me on Instagram for more cool stuff,
@Jakeslabnc