Separate names with a comma.
Some features disabled for guests. Register Today.
See, it's a good thing I didn't order extra A4988's. I'll get started with the included ones and then upgrade the control board as necessary.
I have the dremel 3000, so yes, plastic. Apparently a rotary tool is standard on a shapeoko so in that case I'm shooting for this type of...
@Seul Kee - Thanks! @winand - You're absolutely right. I'm shooting for a 'RepStrap' mentality here, same as you, except mine is just cut 2 MDF...
ROUX is a work in progress CNC that I'm working on that is in between the OX and the Routy. I definitely felt like the OX was overkill (The most I...
James, in a completely different context, that is awesome! Thanks for the link.
raykholo published a new build: ROUX is a 2'x4' CNC that can be easily handbuilt without an existing mill and removes the need to buy generic...
Yupp, that would work. I tend to use the 2 nuts with a spring in between to remove backlash technique commonly found on the Z-Axis of printers,...
Just for the record, RAMPS has plenty of expansion ports and you could hook a relay (with backwards diode) to one of them to drive your pump....
For Mark's direction (no pun intended, keep reading) you'd need opposite ACME nuts, one right hand thread for one end of the actuator, and one...
I think that's my cue. :) Rhino, at almost $300, the board you link is overkill. I'd just use a ramps 1.4 + arduino mega. I just ordered a kit...
This looks a lot like a design I'm working on right now except in mine the bed is stationary and the arm assembly will move in all 3 axes, so it's...
I'm shooting for something like this, with some modifications: First off, I wanted a 2' x 4' spoiler board. Then it occurred to me that the...
It's exactly polyjet! Glad you caught on! Except until I develop some custom printheads (which I plan to do by building a littleSLA derivative...
Awesome. Thank you both. I just put up a new post in the concepts and ideas section that I believe you both will enjoy reading.
Some things that I'm [hopefully] about to work on and would love to get as many people in the community here involved in from the beginning. My...
The belt and pinion concept, where the GT2 belt sits flush with the extrusion is shown using the Dual V wheel. Has anyone made it using Solid V...
I'd definitely put something like this together, but I'm currently obsessed with automation, so I'd try to make it like a Sawgear. 1000mm...
Cool. In any case, I use the wheels and midplanes to constrain everything. It's very convenient when all 3 (or at least 2) origin planes go...
Probably best if you use Save As --> 'Pack and Go', zip it up, and upload it here. I'll take a look. Ray
