Separate names with a comma.
Some features disabled for guests. Register Today.
I know. It never ends. There's always some other derivative that comes up that could be useful. I don't plan on starting another build until I get...
You know, there is a point in time where you just need to shoot the engineer. My brain just won't stop on this whole LCD SLA concept. So we have...
Looking good Jim. I need to get off my *** and get mine moving forward at a faster pace now that I have my larger FDM printer up and running...
Sorry, you wish what was larger? Yeah, the screws add up pretty quick.
I forgot to mention, that 750W heater for the heat bed works REALLY well. If I turn the bed on (60C) and the hot end on (195C) at the same time,...
I was hoping to find an Expresscard solution just from a reliability standpoint, and the fact that the laptop I use for the printers doesn't have...
It looks like Repetier and Smoothieware don't play nice with each other. The only way that I could get things working was over USB with pin-pong...
This... this is how a print should come out [IMG] [IMG] [IMG] This was the first successful print I have made so far. Everything else I...
It's like a low power GPU. It doesn't do the bulk of the work (the CPU and GPU on the PC does most of the heavy lifting as a "virtual graphics...
Looks like neither laptop has a video card capable of 4K (NV3100m on one, Quadro FX3800m on the other). That's ok, that's why I bought the USB...
I couldn't see the max resolution, as with it blinking away on the wrong cable, it wouldn't show up in Windows. The iPad display works fine...
In regards to my own printer, I tried firing up the 4K LCD last night. As I kind of expected, it didn't work. The ebay page did caution against...
I'm trying to use a Smoothieboard 5X with my C-Beam 3D printer, and I'm pulling my hair out with trying to get the communication reliable between...
I had seen that build before, but it wasn't as far along as this. His print results look great. I'm curious how he is running an iPad display and...
The LCD fairy came early! [IMG] Actually, it came Friday. Just forgot to upload the picture. Everything came perfectly packaged. Hope to get it...
I would apply the PEI to glass, then put the glass on the pads if that's what you prefer for mounting.
I did notice that the quality of the soldering for the driver IC's was not all that good. Looks like they had been hand soldered as they were...
There's no requirement that states you have to run the motors at their max current. You just get more torque out of the motor if you run at higher...
The PEI? It will be as flat as the surface you mount it to.
The extruder motor started working last night. I have no idea what happened to change the situation from the day before, but all I did was remove...
