Separate names with a comma.
Some features disabled for guests. Register Today.
Right, I understand where you were going, but again, the best results will come from getting the LCD as close to the bottom of the vat as...
If the cutout for the LCD is deeper than the LCD itself, then the film at the bottom of the vat wouldn't touch the LCD. For the low intensities...
I'm still learning on this, so don't take what I say as gospel, but I'm pretty sure that the routers, even at their lowest rpm are generally too...
Getting to the color filter is not for the faint of heart, especially with the way LCDs are built for mobile devices. All the layers are pretty...
I look forward to seeing what you come up with.
Don't worry. It doesn't take much effort to get me to deviate from my course :)
Glad you are following along. I'll try and post more frequent updates.
Steppers should also be shielded, as they operate at high frequencies. If you are running a VFD spindle, that should be shielded also. For those...
Going up to the 15" 4K screen would have required me to completely rebuild the printer frame, adding to the overall cost. The jump in cost from...
I don't think that TinySine board is going to work for the Gen3/4 LCD that I'm using. The connector is all wrong. That may be for Gen 5 or iPad...
That's something I'm still investigating (albeit very slowly :) ). Everything that I read up to this point about modifying LCDs for this purpose...
460nm LEDs are available in versions that have more power than you know what to do with (100W+). That's not to say that you want to use LEDs with...
There is no "clear coat" on the extrusions as such. The extrusions are clear anodized (it's regular anodizing, but with no dye added). Any...
Good luck with getting everything squared up.
How does the stiffness of the Z-axis column feel with it only being supported at the end? The connection from the C-Beam to the 20x40 in the back...
With the hidden corner brackets, I'd say it's that the bracket is not square and it pulls the extrusions out of square when tight. You should be...
A little. I said I would get pictures, and I will :) Last week got a little busy. I'll post an update once I get home tonight.
Don't feel like opening up the 4mm bore pulley yourself to 5mm?
Thanks for the clarification Joe. Guess I got my information a little mixed up.
Wheel, gear, pulley... They all work on the same principle. It's all a ratio of drive diameters. For pulleys, it's just easier to use the tooth...
