Separate names with a comma.
Some features disabled for guests. Register Today.
used chatgpt to translate, you can too "When I want to export the file from Illustrator to CAM, vectorized, it exports incompletely, even though...
and check that in mounting the switches you did not mount them upsidedown and cause a short between the circuit and the frame
yes, you need to adjust the acceleration values for all 3 axes. the defaults (you did load a machine profile, right?) are usually quite slow but...
also, if it was working, there is no need to reflash the controller.
this is electrical interference, known as EMI. basically, the plasma spark is a big radio wave transmitter, and the arduino is receving the...
cutting up in the air means Z lost position. how hot does the Z motor get? if you cannot touch it for 5 seconds it is too hot, wich means it is...
then you need to do the 'fake-the-home' method, machiens always need a home How to 'Fake the home'
outlining the part is kinda like creating soft jaws from a part [MEDIA]
seems you need higher clock speed, maybe an ESP32 can keep up (240mhz instead of 16mhz on the atmels)? only caveat is to ignore the onboard ADC...
one does not 'find a script', one WRITES a script (-: in the Linux world the sed command can do it in 2 lines (generated by chatgpt, so subject...
why have you connected the laser to a coolant output? it should be connected to the PWM tool output so that M3/M5 can turn it on and off, but...
likely unrelated because the THC is not reading the Gcode at any time, right?
are you using a vacuum for dust extraction? vacuum hoses generate static electricity, but it does depend on atmospheric conditions, so you may...
added to my ever growing list of videos to be made (-:
having calculated or measured the offset I would create 2 macros to move back and forth between the 2 tools. lets say the laser mounted 3.2 inches...
CAT6 has a good chance of working because it is shielded twisted pair.(with extra space between pairs caused by that + shaped insert) Cat5...
X and Y are supposed to move independantly so I am guessing you mean Y1 and Y2, the left and right sides of the gantry. First make sure they are...
no there is not. The Blackbox has motor drivers built in, just use them.
basic math, really.... 200 motor steps per rev * 100 (gearbox) * 8x (microstepping default in X32) = 160000 steps per rev on the axis 160000 / 360...
I agree, but changing it to a G21 G90 G53 G0 Z-5 may not work for everyone (though it should since we encourage everyone to use hard limits and...
