Separate names with a comma.
Some features disabled for guests. Register Today.
Not clear what you mean here... The spindle cannot move independently from the Z axis... MG
Yeah, that looks bad. Looks like a problem with the eccentrics. Side to side motion like that is usually due to wheels improperly tightened....
There is no way that the direction of an axis can just reverse all by itself. You need to find the cause of the problem instead of just...
Temporarily disable soft and hard limits. Make sure you have something near to correct entered in $130, $131, and $132. See if that helps. MG
Possibly your driver was corrupted? Got to Control Panel/Device Manager and check under "Ports Com and LPT" heading, you should see a USB/Serial...
Where did you find the missing files? MG
Was the machine actually moving using UGS, or just the display updating? There is no way you can see a movement of .01mm with the naked eye......
Yeah, you are right, it won't run for me either... MG
Do the jog controls work normally? Check G54 to see if you have an offset. MG
Hi guys: Just a note, there is a new version of GRBL Panel posted up, .18. Now for the bad news... Gerrit Visser is hanging up his spurs, and...
Ryan: Not sure I follow this. Can you elaborate (with pix?) MG
Just load up the regular drawings in CAD and stretch them 1.1"
The files are on the build page under the "Files and Drawings" tab. They are DXF files....
