Separate names with a comma.
Some features disabled for guests. Register Today.
1) You should be able to move the machine until the gantry plates physically contact the ends of the c-beams. Set the $130, $131, $132 correctly...
You can use either method, it makes no difference. Other than one method requires you to invert the $2 and $4 parameters in GRBL settings. MG
[ATTACH]
If you are using optoisolated stepper drivers (TB6600 drivers usually are) there is usually no ground connection required. Depending on how you...
So lemme get this straight: You can jog any axis (X,Y,Z ) with the + jog button, and it moves. Use the - jog button on any axis and it does not...
Yeah GRBL Panel hasn't changed, and yes, it was set up to use V1.1. It wouldn't communicate if it wasn't, 1.1 changed some of the communications...
Rob: I have never used work offsets, nor the zero buttons on GRBL Panel position display (X,Y, Z, or Zero XYZ). Never figured out how to use the...
I have a client who recently upgraded his machine to GRBL1.1G. I was looking at it, and the zeroing of the Axes is completely different than 1.1F...
Yep, that's what it was. Controller is fine, just a plug came out. I don't much like the BB plugs, they don't have much retention force and fall...
Thanks David It's a client machine, I won't have access to it until tomorrow. I'm starting to think that one of the motors/drivers is dead, and...
Which type of external driver are you using? Are the input signals in pairs? IE Ena+, Ena-. Step+, Step-. Dir+, Dir-? If so, you need to...
Hi Guys: I have a weird problem on a Workbee 1010 with a black box controller. The two motors on the Y axis don't appear to be in synch. If I...
He's using GRBL to drive his old LPT based CNC. Not the other way around. MG
See here: GRBL Settings and Calibration – 3D Tech Works Scroll down to the Movement Calibration setting. This explains how to calculate the...
I just published a build in the Builds section that shows an easy way to get about 20-25mm more Z travel. Doesn't make much sense to go more,...
Metalguru published a new build: Increase Z axis travel by 20-25mm with minimal modifications Read more about this build...
Sounds more like a mechanical problem than an electronic one. Make a little g-code program (macro?) that is just G0 X+200, G0 X-200. Center...
When your circles have discontinuities on the top and bottom (Y plane), that means your Y axis has backlash. When your circles have...
How is it different? It's just a matter of degree. A hole is a just series of concentric circles... Only the outside one matters... Anyway,...
Well, a hole is a circle... These holes just are very shallow... MG
