Separate names with a comma.
Some features disabled for guests. Register Today.
There are two schools of thought on this grounding issue - people who advocate NOT connecting DC ground to chassis ground, and people who are...
That's a nice mount! and only a couple of dollars more than what the OB mount costs! MG
Come on, Turk, you are a "maker". Instead of grousing about how you can't use your machine, invent something that will work until you can find or...
It has to be really fine to be flammable, like flour. The dust off an 80 grit sanding disk is coarse by comparison. Not making light of your...
Hey guys, you have a couple of choices here: The Dewalt DWP611 fits perfectly in the OB mount, I believe it's 69mm instead of 71, but I use it...
Sounds like you are on the right track. Yes, a small vero board to mount all the components on should work OK. Just keep it close to the...
Justin: I just use the screw mandrel that comes with the Dremel: [IMG] Along with the reinforced 1.25" cutoff wheels which are much stronger...
Once you hit 25mm in length, the lengths start going up in 5mm increments. Shorter than 25 they are usually avaialble in 2mm increments. You...
I have had good luck cutting ABS and Acrylic with the "flat" type of single flute bit. [IMG] Someone also pointed out a new type of bit called the...
I have had a lot of phantom limit switch triggers with GRBL and Arduino boards, especially the Arduino Nano. The pullups in the Arduino are the...
What, no profane comeback? I have to admit, you are the first person I ever ignored on these forums... MG
https://www.amazon.ca/Terminals-Connectors-Ratcheting-Terminal-Crimping/dp/B072ZXFJVV/ref=sr_1_13?ie=UTF8&qid=1516738056&sr=8-13&keywords=terminal+...
First off, https://openbuilds.com/members/jestah.66/ : I heartily agree with your sentiments about soldering. Solder has almost no place on a...
Sure is long winded. He could have said what was in that video in 3 minutes instead of 12. I agree that ferrites help immensely, along with...
Oh, that's the same one you put in farther up. MG
Uhhh, Ronald, you forgot the link... MG
Hi Guys: This is my latest build. I decided I'd like to beef up the standard OX build a bit, stiffen up the X and Z axes, and generally step it...
Ahhhh, I think there's some confusion here. The C-Beam machine doesn't use belts... it uses lead screws. If you are doing engraving with the...
Ahhh, I get it now. Dang, those things ain't cheap. MG
You completely lost me on that one... What is the purpose of the nylon nut? How do you have room for both a nylon nut and a tee nut in the slot?...
