Separate names with a comma.
Some features disabled for guests. Register Today.
I can send you the sketchup drawing and you can make it using your cnc mill... MG
Just going back to your original concept drawing above, and instead of having slotted holes for mounting the plate, slot the wheel axle holes....
Ah, but if you combine this with your setscrew idea you just might have something... This would still allow individual adjustment for each...
Not a bit... As they say, a picture is worth a thousand words... MG
Should just need a small relay, probably way less than 1A. You could measure the current on your normal torch switch by just shorting a current...
Use the Spindle control output, and wire it to a 5v relay module. Wire the relay NO contacts across the contacts on your plasma cutter that...
As the originator of the design, I have not built this. This is clearly labelled as a concept. You Could see the Dragon Too build concept,...
So, I'm not clear on how this works. It looks like there is a microswitch on your outside carriage, do you lower the inside carriage down until...
Ah, I see. Seems a bit complicated, you could just use an inductive proximity sensor or even just a microswitch to detect the material to be...
Why do you need 2 sets of carriages for the torch? Isn't that a lot of extra weight? MG
I like those custom side plates. Going to be a bit difficult to adjust your eccentrics, no? Can't wait to see it in action...
Ah. Check with Trish at the store, (http://support.openbuilds.com/support/home) last time I talked to her they were waiting on the C-Beam XL Gantry Plates...
To what are you referring? Both the laser and touch monitor are in stock as far as I can see...
Yeah, post the build on the builds page so we can see how it turns out! MG
Thanks, man.
Yes, I agree with you wholeheartedly. It was a simple answer for a simple question. I really like the idea of a fully programmable box joint...
Hi sonny: I somewhat agree, Sonny, but his program essentially only contains one line. With a box joint jig, you cut a slot, move the work...
Hey Paul: Can you send me a link? I been looking for a large touch screen monitor for a while now... MG
You could try M30, that is rewind to beginning and reset modes. Also, I would think you should use G01, or G00 for fast move, and not G19. Make...
You should be able to hook it up to the PWM output of your Arduino and control the intensity by using the S= g-code. There is more info in the...
