Separate names with a comma.
Some features disabled for guests. Register Today.
reply sent :)
updated extruder files included in zip
That's all you need for the carriage and belt plates the effector plate is 1/4
Thanks Kyo :) Here are my files, I made printable versions of the alumi parts but suggest getting your hands on milled versions.
It's bin a while but I'm still working away in the background on a few things. I'm not sure how many have a completed build yet but here is where...
Here are all my files to date, I will continue to update as my build comes along :) There are stl files for the aluminum effector parts also but I...
Here is the effector I designed and plan on using :) I will update the stl files as I go and will make a printable version of the aluminum...
Yes your on the right track, if the filament binds it will cause under extrusion
I have some just have not tryed it yet
Also a good idea to stop skipped steps / keep transistor temps down http://www.thingiverse.com/thing:145946
Be sure to square the z also tune the driver to about 75% on the pot
You may have to change the hotend thermistor settings as mine is set for the e3d
open the OBi3 ino file in the arduino software
Saving it now ;) will upload in a bit gotta give the kids a bath
You may have to change a setting because my file works with them wired as per the drawing
Correct ;) It makes a difference not sure why but it does
Heads up for motor setting and esteps X and Y axis step setting is 80 Z 400 and esteps start at 720
Look at the drawing closer and then look at the pin out of your endstop
Are your end stops connected as so? [ATTACH]
Yeah will save May Marlin and upload a file for ya
