Separate names with a comma.
Some features disabled for guests. Register Today.
Ok so here is the up to date BOM to build your own LD3X board, I will post the updated PCB layout when I get to my laptop 1 x Arduino Nano 4 x...
Burning hot is not good, warm but able to touch is normal. I would say be 100% your drivers are set right, I know not much documentation is...
Is the circle the same every time? Cut the circle twice and compare If it is consistent the your problem lies in your software. If not something...
Back on track!
Little further with the E3D6 [ATTACH]
Nothing :) Adjust your 53.33 to 53.34 and so on till the numbers add up ;)
Yes I did use 3 more eccentrics and 4 x 1/4" spacers per side I do one at a time in small amounts :)
Update! Kit has sold, more will come :)
Most up to date version OX kit ready! First come first serve ;) Packing it up now [ATTACH] Contents 4 x Custom Main plates 4 x Custom ends plates...
Yes the files will be released as a full zip with all files to reproduce the OX AI :) it helps loads with alignment, as to your idea I kinda get...
Both sides done and wow what a difference in the way the wheels run. Having the inside support really helps keep the wheels squared in the v-slot
Lol :p
One side done, gotta get some more hardware before I can do the other [ATTACH]
That way you can use nema17, I used nema11 in the laser v build. The new laser Fiber OX runs on the LD3X and runs 3 nema23 and 1 nema17
Nope :) The PCB maker did a crap! Job I could not sell them, breaks in the traces and poor hole drilling :(
Yes that is it's peak amps, I never run anything full out they tend not to last :)
Got the Effector with 1.75mm E3Dv6 done :D [ATTACH]
12v 280w PC power supply :) P.s Sorry for the long wait on LD3X The boards did not meet my spec :( I will be doing them myself ;)
So all three carriages are assembled and running smooth, then it's just a matter of aligning/running the belts:D [ATTACH] Once my CF tubs arrive...
