Separate names with a comma.
Some features disabled for guests. Register Today.
Speaking of heatbeds lol yours is on it's way soon just waiting on the glass ;) Here you can see the base that is milled from a high temp/impact...
They are plastic grub screws A fast way to get some, rip an on inkjet apart or you will have to find a supply and order. I have some but it may...
It's for TR8 threaded rods from the OB store ;) BTW nut kits are in $25 shipped Contains two nuts and 6 hardware screws The ABS prints like a...
I don't use any supports but do use BLUE painters tape and a 5mm brim to create more surface area for the bed to hold onto. With the proper...
Here you go bud, I think you got a mix of the orig and my modded version stls o_O
????! I will put the stls together now, give me 30 min :) Sorry bud not sure what happened there
2x625z for Y 1x624z for X In my kits I use 3x625 OB bearings because I have 5mm to 3mm inserts ;)
And now for a ABS test print :nailbite: [ATTACH]
One meter of each ;)
OBi3 kit with assembled Wades minus the hotend getting packed for shipping :D [ATTACH] On to a custom themed one ;) [ATTACH]
The parts you printed are designed for M10 in the y direction and M8 X direction
:p You know me all to well Tweak! :thumbsup: Just need to wait till next pay to order up the c beam and 4 motors ;)
I gots to get my hands on some ASAP :D:D 3 x 1000 on the list ;)
The tape goes right onto the glass no treatment needed and prints stick good. Green painters tape is a gamble some works some don't :/
Yes all my prints are PLA :) I will be trying ABS but I hear it smells The micron level is determined by your pulleys, belts and micro stepping I...
So I figured I would put the OBi3 to the test and see just what it could pull off :) [ATTACH] .1 layer 12.5 micron resolution :D Then I said...
The bearings go on the outside ;)
:D [ATTACH]
Ty :) I did calibration lastnight and printed it's first part along with a test of the heatbed. It takes 5 mins to get to temp and a blast with my...
Yes 300 is correct as the verts will allow space for the belts still and you will have a little overhang on you bed to allow for some sort of...
