Separate names with a comma.
Some features disabled for guests. Register Today.
I'm working as fast as I can, each board takes time due to the amount of holes needing drilling.
Where are you located in canada? I would be more then happy to help with your build my friend :) I see your not using my plate files or at least...
Are you just prototyping with the wood plates and then going aluminum ?
BTW that's a fare price on the bit as long as it performs :)
Yep that's it and spindle speed won't matter much in acrylic as long as your feed is fast and you keep things cool with cutting fluids "soap water...
Soapy water is what I use as a cutting fluid with acrylic ;)
Ty ! I use my used 45 helex two flute bits after a few run in aluminum. Spindle @10000 rpm and feed is 40 ipm
Ty, most of my waiting times are due to shipping wait times but in between it gives me time for other things :) Now that I got things in it sure...
Test fitting of the arms went well :D [ATTACH]
Here it is, a simple but effective jig :) [ATTACH] I have done all six rods and they are now curing.
Carbon tubes showed up yesterday, I cut them all to length and then epoxied the traxx in place on one end. [ATTACH] [ATTACH] I now have to build...
The laser-v build has the required circuit diagram ;) Here it is [ATTACH]
Wow nice score! They will both work, main thing is that the shaft be 8mm so that the ER11 colet can replace it and the KV rating is based on a...
Love it and wish I had the means to make a beautiful housing like that :) I would go with 608zz bearings as they are rated for the RPMs you will...
Your motors should be able to handle the max your drivers can provide. I would heat sink your drivers and get a small fan blowing to keep things cool
What is the max current for your motors and drivers?
Change your homing and seek settings a little higher and see if it smooths out. The slow movement in causing the sound IMO $24 = 2000 $25 = 2000
Looking awesome!
I will be showing my layout and how I have wired things soon ;)
These are the drivers I'm using and I'm happy so far, grounding must be done properly or you will have jittery movement and skipped steps Also...
