Separate names with a comma.
Some features disabled for guests. Register Today.
Either 1) G10 L2/G10 L20. grbl follows a subset of the LinuxCNC standard: G Codes & Grbl v1.1 Commands or 2) call each in turn and probe in...
It seems kinda pointless to use a position, speed and acceleration controller that doesn't do what you actually want to do (because it's not...
I take it checking out the DIY route didn't go quite according to plan! This is a pretty huge project, but I'm open to discussing some details. DM...
I'm not saying it's not happening, but a simple magnetic field would require movement in order to induce a current. Stationary magnets shouldn't...
This is true, due to the nature of the mini V gantry plate actuation system, though with a small amount of effort, a simple angle bracket can fix...
You could be buying OSG or Sandvik end mills and they'd still be undersize if they're not designated as "over-tolerance". When the carbide is...
Personally I put Mesa cards in eBay-refurb Dell Optiplex boxes you can get for ~$60 or so. Mesa stuff is expensive though, and I don't know how...
Laptops often struggle with real time processing and IO due to battery management issues. Better to use a dedicated small-form-factor desktop PC...
Probably need to tap off the parallel out from the host PC. It might be able to ModBus over a network port, I'm not sure, I haven't really looked...
I usually check Amazon and AliExpress. Failing that, I bore them myself with drills and a small hand-ground HSS boring bar, but workholding and...
No, this is entirely plausible. It definitely increases as the file goes on. I didn't see any large jumps earlier in the file, so it isn't...
You can literally see it- and the line it's on- in the screenshot. I mean, I am assuming your G54 Z0 is at the top of the stock, and your safe...
Ah, that's a lot of lines to remove. Easy if you have real-time simulation with it open in a control that allows you to edit in place (eg. bCNC),...
No open vectors in OB CAM [0]=69967']Search Results for Query: closed vector | OpenBuilds What I'd do if you don't have access to other CAM...
I just open the text file in notepad. ".nc" is like ".html"- it's not a real extension, it just tells a program to parse a text file a certain...
There are a few of these as the file goes on- find-and-replace "Z-0.7" in Notepad++ to see where. If "plunge" is more than 3/4", I don't know if...
Yeah usually you'd have to get them double-end machined direct from the factory. Most will accommodate, but it has to be a decision ahead of time....
What if you put both motors on each end of the same screw? You'd get the acceleration/inertial matching benefits with the heavy system, but...
That's an easy solution to the primary problem, but then you have to give up on Encoder feedback is not a feature of very simple motion control...
Given the incompressibility of fluids, I'd imagine that hydraulic motion control systems use some form of flow measurement or pre-calibrated...
