Separate names with a comma.
Some features disabled for guests. Register Today.
Thanks for the link on the feet, those look like they’d work well. I’ve thought about just moving the laser to the 1010 and just have a single...
Thanks for posting this, I liked it so much when i was looking at redoing my setup I made the same thing. Just instead of drawers made a place for...
lol cool... well this is what it gave me if that helps. 64-bit block cipher 3DES vulnerable to the SWEET32 attack (CVE-2016-2183).
Hey guys have to say I'm loving the Control software. makes using my new Lead1010 a blast... I happened to do a vulnerability scan on my network...
Well.... my 1010 is fully built and alive! can't wait to cut something with it. Fun build thanks ya'll!
Thanks both good suggestions. Yeah I was thinking the 500mm might be a little too small as i had the same problem with my acro when i bought it......
I just spent time going through the Lead 1010 parts list and adding all the pieces to my cart but tried to use 500mm size parts instead of...
Thanks WildBill, I spoke with Jay at Jtech and got some suggestions on settings to use too, which has really helped. I've been playing around and...
While i don't have an Opt laser, this looks like a great little manual to me. Nice work
I'm learning how to use my laser and having a lot of fun doing it. Right now it seems to be a lot of trial and error with settings. Does anyone...
Just wanted to post a few pictures of my Build and show my safety shield that i made. I bought the acro kit when it was first announced and then...
Very nice setup!
make sure set 0 where you want it (normally lower left) I found if i manually jogged the gantry in laser web it would show the home position at a...
Thank you guys for your help. I finally was able to get my first successful burn done last night. I confirmed that the board had the latest...
Yep, I agree Bubba, and as it turned out the wire from teh xpro to the controller input was slightly loose on the xpro. That is now sorted and...
Thanks, I did not have anything in the gcode for laserweb, so i've added M4 into the gcode start and M5 was alredy in Gcode end. These are my...
Hey all, I just built my Acro with the xpro board and the Jtech 2.8w kit. I'm using laser web and GBRL Sender. I've got all the settings in GBRL...
That's pretty slick. Thanks. I did my first test file today without laser, just zip tied a sharpie to the plate and drew on a piece of paper......
Hey all, how are y'all keeping the wires up out of the way? I know some of you are using those cable chains but for those that aren't? Thanks
Hey all, I built my Acro last weekend and reading through how to hook it all up and use the software so that i can start testing out the movement...
