Separate names with a comma.
Some features disabled for guests. Register Today.
The Dust Shoe has 6 LED lights underneath running off 24V supply
Side view
Rear of gantry
First try at a dust shoe
Full Frontal Nudity. Shows Baltic Birch plywood bed.
Z Axis
Electronics module
This is the Sketchup concept
Jonathon Duerig, I would definitely stick with this method. It is possible to do this with a disk sander, and in fact I already have one. But it...
MaryD, I wrote that.:D
Kyo, I actually found a 1m caliper for a decent price - $332 CDN, that's about $19.95 US;)...
Guys: I've found that it's extremely difficult to get my miter saw perfectly square. And then get that perfectly square with the supports. And...
dasmu Those motors are 3A each, so it should have no problem running 4 of them. MeanWell makes great power supplies at reasonable prices. If...
Hey http://www.openbuilds.com/members/barry-danks.43092/ It's just that Ikea used to have all these Rube Goldberg contraptions for testing...
Yeah, I was thinking about that too. Problem is, hole saws are very inaccurate, and you would have the pilot hole going into the extrusion. You...
Yeah, what he said... Much easier than drilling a hole all the way through the extrusion, but you would almost have to have a milling machine to...
80/20 have a fastening system that goes into the slot of it's extrusions. IIRC, you tighten it up using a standard Allen key in the slot. Kind...
I cut a lot of extrusion using a standard Craftsman miter saw equipped with a cheap $25 non ferrous metal cutting blade I got on Amazon. I don't...
Do you work for Ikea?
What Rick 2.0 said. Supporting somethin like a router on a single ended arm would be quite unstable. I've seen a plasma cutter similar to this,...
