Separate names with a comma.
Some features disabled for guests. Register Today.
No, same ground but don't power everything from same power belt or power strip, and use a filtering strip for the control power. Also can check...
"it is in the same vfd belt and I have no grounding but I have a separate one-meter cable stuck in the ground to the cnc and everything is...
Is everything connected to the same power strip I see in the video? you can get filtered power strip, and separate the vfd from the other things....
With ER's you have to loosen and then unscrew about 2 more turns to release
Sounds like EMI for sure, the instruction are intended for router use, plasma cutting is far worse with EMI. Earth grounding the motors and frame,...
Big heavy spindle maybe getting out of control on the way down? Try lowering your max travel speed and acceleration. Try air cuts while trying to...
Check your motor coil pairs. Anything written on the brake? model number voltage spec anything? Gary
Typically any motor brake is spring loaded and is "on" when the power is off, this is just to stop the z from falling when the motors are off....
Check your wiring and verify your coils are wired to the BB correctly, use a meter (resistance) or the short method to find the coil pairs, using...
Is the 24v plugged in and powered up? the fan runs on the 24v power. Gary
Check 0-10v settings in grbl? Regards Gary
Check those motor couplers. Could be an intermittent wire connection causing lost steps. Gary
Maybe a windows update changed your keyboard repeat or delay settings, can check that and try some different settings. Gary
There is a YouTube video on how to do it. Link on the Estlcam site Gary
classic wiring issue symptom, check your coils with a meter don't rely on the sheet. Docs troubleshooting section Gary
Another option, Estlcam supports STL with no conversion, and has grbl post for cam or can run Arduino type machine directly. Cheers Gary
I would draw it in Tinkercad export as STL and use the 3d STL option on Estlcam, would need a small ball end bit to carve it. Gary
No problem Tres, sometimes it's nice having an easy question I can answer! Gary
Those are the plugs, pull them out. Gary
I make a lot of small holes for projects in plastic, wood, aluminum and G10, they are always undersize, it's a combo of flex and backlash. I...
