Separate names with a comma.
Some features disabled for guests. Register Today.
April just put out a video showing some jigs they use for production, it's a good watch [MEDIA]
Is it moving smoothly a few inches or noisy and jerky? if the later you have a wiring issue still, sounds like it from the current light being on...
For the Y issue, swap one of the wire pairs around to reverse that motor, so if it's like green-red, yellow-black, making it green-red,...
" sounded like they were working"? you mean vibration and noise, but no controlled movement? make sure to verify your motor coil pairs. copy...
When you click the port box do you get a drop down?
These look so surreal, I need to play with this, thanks for sharing!
Also.. the ER nuts are cheap and you should buy enough to live with your most used collet sizes. saves time Cheers Gary
normal
1) Unless there is some weird way to have both Y motors facing the same way then you would wire them just like the belt drive. 2) I wouldn't...
Everything I've seen shows a big improvement, would need to keep optimizing for best results with your system and material. Regards Gary
Yes for sure, it blows the off-gass and smoke out of the way letting you cut faster and with less diffusion of the light. Quick google search...
Air stream for sure!
Hi Rob, what's the speed set to for that Y move? are you using the default machine settings? Please post your settings. Check and recheck your...
Yes the extension wire is broken most likely, not the motor, wires break after years of flex Cheers Gary
99% of the time that is a single broken wire (or pinched on the insulation at the connector) out of the 4 on the motor connection. Could try some...
A two flute cutter will be stronger than a single flute most of the time, save the single flute for plastics and aluminum. Also, use the biggest...
have to be willing to wait a month [ATTACH]
LOL then I found it https://www.amazon.com/dp/B08TZP438K/ref=twister_B08V1LKQRW?_encoding=UTF8&th=1
10mm bore is an odd size, is that a motor shaft? Powge seller on ebay is one of the best I've found and they don't have that. mcmaster carr...
Like Peter said could be wiring for sure, but to break in the nut block you can chuck the lead screw in a drill and run the block up and down the...
