Separate names with a comma.
Some features disabled for guests. Register Today.
They are in the works, components are out by a week on shipping Won't be long now :)
Make your own bud! Get some hardened rod from an old inkjet "$10 at thrift shops" and fire up that puppy ;)
Lol good eye :) Yes I'm designing my own QAV250
Things are crazy but kits are in the works Read above :rolleyes: I'm sorry for the hold up guys but life has thrown some bumps in the road. Kits...
In mdf with the right feed you should be able to do half depth passes IMO
not an issue at all :)
Short answer is reliability and price. For the average hobby folk price predicts most builds. A $15 IC for the diode compared to a $1.50 relay and...
This was part of what inspired my first build with the M140 :) I'm not sure how it works myself but have seen up to 5 diode arrays. Really there...
I had word that my new LD3X boards would be started this week coming. It's bin a bit of a struggle to have them produced at a fare cost so I'm...
I would say yes but can't say much just yet. The fiber OX is not bolted and seems very stiff. I am however only using a laser on it also ;)
I drilled the middle slot of the 20x60, the bolt heads are hidden in the rail slot Used 5xM4 one middle, one each end then one in the centre left...
Part number is M140
I used M4 x 20 bolts, clamped both rails together nice and square. Then drilled 4mm holes through the first beam then just scored the second...
Np ;) Here it is, the surprise part of the Fiber OX. Pew Pew! It's a frickin laser man! The 445nm OX :D [ATTACH] G-code sender [ATTACH] Final...
I have my acceleration set to 100 Seek set to 10000 X and Y set to 53.33 Z set to 400 This is using drivers set @1/16 step rate
Yes indeed, they are set to the max the little stepsticks can pump out and @1/16 micro stepping. No issues as of yet
Great motors :)
Little Fiber OX update for you guys :) LD3X installed and mounted along with some HDPE wire clips to keep things in place ;) [ATTACH] And here a...
New LD3X test board :D [ATTACH] Wiring and getting ready for full testing :thumbsup:
Yes I make out well before motors stall at anything above 30mm a sec. I'm looking to get 2 amp drivers and bump up to 24v with a rumba board
