Separate names with a comma.
Some features disabled for guests. Register Today.
Ty for the kind words :) The PCB I use for my boards http://pages.ebay.com/link/?nav=item.view&alt=web&id=400569497455 I print my positive films...
Did a bit more work on the OX AI, my limit switches came in and I made up some mounting plates [ATTACH] [ATTACH] [ATTACH]
I would not go to all eccentrics on the Z assembly Take things apart, then drill the 5 mm holes that mount the blocks a tad bigger 5.13mm Then...
I agree big time :)
The mill I use to produce all of my parts at the moment was built from the ground up. It started out as an RC spindle setup that I then used to...
What I got done while milling today :D [ATTACH] All motor wires have been ran / cleaned Drag chain installed and it's on to the Y axis I go ;)...
I don't take the risk and rather a flat flush mounting surface for just the reasons you posted. It just makes for a more solid machine ;)
Cam angle and lighting ;) The shine of the finish is nice but not perfect
Are you using the tinyG board? If so there is a fix that will enable all motors on power up. From what I understand by default it is set to enable...
We'll done! Vac the chips and lube in little amounts just to keep the bit cool. Best bet lube, let 2 passes go then vac/repeat ;)
I have not got that far with them I just set them with the pot at 50% and a bit I will fine tune everything after the controller is assembled....
You should have the motors enabled before firing the spindle. If it moves with the motor enabled then the motor is not strong enough to handle the...
Lol I was looking at that last night I will have to keep my comments to myself as I'm Canadian and that kind of stuff is not allowed. Gosh darn...
Lol Yep I will keep you in the loop ;) The motors are from dddman, here is his site http://www.fuzztech.ca I have cleaned them up, blasted them...
They are TB6600 4.5 amp drivers from china. They work fine but I was not happy with the layout. I have since found much better boards, same driver...
I'm currently working on some sets. The best bet is to keep an eye out for when they are done. I now only do them in batches because I'm so busy...
Little update :) Motor spacers milled from 6061 [ATTACH] Motors mounted with spacers in place :) [ATTACH]
It is not what I was told by the person I got it from. It is GPO3 polyester glass ,a composite sheet produced from glass mat and polyester resin.
All parts are now curing for assembly :) [ATTACH]
I got it from a local electrical shop that was throwing out a bunch of old switch gear. It is super easy to mill but hard on the bits Got the Z...
