Separate names with a comma.
Some features disabled for guests. Register Today.
So I used the router to cut out four circles for the dust collector, just to have a spare set. I should have went a little bit bigger for the...
Made a "few" clamps today out of a 2' x 2' piece of birch plywood. I uploaded them as a project you can find here. I also picked up the parts I...
Just a quick clamp that has an overall dimensions of 40mm x 130mm. It uses a threaded insert for the pivot point and 1/4-20 hardware. The resource...
Hisha submitted a new resource: Plywood Clamp - 1/2in plywood clamp with threaded insert Just a quick clamp that has an overall dimensions of...
@James1949 Sorry I should have given the source of the image files I used. I gave both because when you are using V0.9+(which V1.1f is current)...
@James1949 I would reference Kyo's post for a couple of different ways to wire up stepper drivers if that is what you are looking for. If you are...
@Kyo Here is the start of it!! Raspberry Pi,Xbox Controller, bCNC and You!
Hisha submitted a new resource: Raspberry Pi, Xbox Controller, bCNC and You! - Using a Xbox controller with bCNC. This post is going to cover...
This post is going to cover connecting and getting to work a Xbox controller with a Raspberry Pi and bCNC. This will probably work also with any...
@Kyo I will try to do a post about the Xbox controller later this week. So tonight I cut my other half of mdf for a new spoilboard, this one is...
So spent a little bit of time tonight working on getting the xbox controller to work nicely for me. Needless to say finding documentation that...
After getting my Routy build done, I needed to build something bigger. Then I saw Kyo's Sphinx build and knew I wanted one!! I contacted Chris for...
So I believe I can now say the cheap solid state relay I bought from Amazon is a piece of junk. [ATTACH] Along with the problem of the voltage...
Yeah I should have known better, but it's all a part of the learning process. Just glad it wasn't to expensive of a lesson. Just ordered a 2 set...
So I cut a spoilboard out of the MDF and mounted it down. [ATTACH] Then I got a bit impatient and decided it was time to cut something and...
Will measure for sure in the morning, but currently have my soft limits at X = 792mm, Y = 813mm and Z = 88mm. So safe to say my cut area is 790mm...
Today was an interesting day. Found out that a 4'x8' sheet of MDF cut in half, both of the sheets just barely fit in the back of a Grand Cherokee....
So I come home today to another work of art. Now more wiring to do!! [ATTACH] [ATTACH]
So after adding in aviation connections to the limit homing switches and wiring up the 110v relay to the Arduino, I started playing around with...
So last night the beast came to life!!!! I finished soldering the aviation plugs for the stepper motors, and did a temp soldering job on the...
