Separate names with a comma.
Some features disabled for guests. Register Today.
Version 2 (5/12) Files listed below pictures There is an Assembly Manual online at http://3dwrx.com/TrueUp/Kit-Manual2/index.html It...
I've had a couple of people buying a TrueUp kit who had the same problem with the glides. It's not actually a backlash problem. Instead, the...
M3 and M4 screws are buttonhead. On 2 extruder motor screws and lever screw, and 4 bed corner adjuster screws I use socketheads.
Suggestion, runthe stl through netfabb for cleanup first. Netfabb may standardize internals. I don't know, just a guess as netfabb is the defacto...
For kits I sell I actually ship a different glide bushing. It is PLA with a nylon 6/6 round insert bushing http:///3dwrx.com/TrueUp/z-glides.stl...
Taulman Alloy 910 is the nylon I used. That's $60 a spool, pretty expensive for 4 little bushings. The bushings can actually be printed in PLA. I...
$75.00 + $15.00 shipping (If Orange & Black or only Black)
Two 5mm wheel holes are 60mm from each other. Two 7mm wheel holes are also 60mm from each other. The 5mm pair are 100mm from 7mm pair. All 4 are...
1:1 The design does not leave room for a 2:1 pulley
You might have reason to lift .24 instead of .25 or .26, but never .244 instead of .245, so either is OK. 0.005 would just move 2 steps instead of...
Pretty sure you meant "lighten the weight of the of the X axis" (the Z axis is capable of lifting the entire printer). Why would you want to do...
Use any E3D bowden. Question, why would you want a bowden setup?
BRian At the bottom of the Build page are the URLs for TrueUp STL files. Your .stp software should be able to import .stl files.
That all depends on how you plan to "nut" that screw. Look back over this discussion earlier, this subject has been covered with numerous...
Jack, take your nylon nuts down to the hardware store and try them on various M8 bolts from the bolt bins. If they fit them snugly, your Z screws...
The X Belt Anchor is a printed part. The spacers press fit into it are 6mm from Aluminum Spacers
It's fixed now. It was 2,000kb short?? http://3dwrx.com/TrueUp/kit2-assembled.zip
I use a Diablo 84 tooth blade for cutting extrusions on a chop saw. Over 300 cuts and it still produces the same quality cut. No lub. The blade...
Same experience here. OpenBuilds cuts are not square. Have to Same experience here. OpenBuilds cuts are not square. Have to trim to get a...
I think I rounded off price/shipping. One thing about using Kydex is to use 100 grade, not X or Y grade. It's stiffest.
