Separate names with a comma.
Some features disabled for guests. Register Today.
Thanks for that link Gary. From the pic I already have questions about your build. I'll get with you next week when you're home. Enjoy!
Thanks for letting me know about the URL typo. :thumbsup: Fixed it.
Consider: A 100mm long extrusion requires a 200mm long close looped belt - the belt get measured both directions, the extrusion only one. Adding...
Keith Davis published a new build: A Cartesian printer using bushings for the Z axis instead of wheels or linear bearings. The design also...
To increase the Y and X axis, just add the extra to the lengths of the Y and X extrusions. You want a 300mm Y axis, add 100mm to length of the Y...
You're welcome! Remember - we'll want pics here from the MRRF too!
http://3dwrx.com/TrueUp/glide_bushing_pla_rod-SKP.zip http://3dwrx.com/TrueUp/glide_bushing_pla_rod-STL.zip These may be helpful to for a DIY...
Problem with an update kit - picture the bean can display in the grocery store, stacked as a pyramid. Invariably the update piece is one of those...
Well.... see.... finding a point to say "OK, stop changing things HERE!" is not easy. Maybe I need a wife.....:blackeye: But, I did the next best...
http://3dwrx.com/TrueUp/mks_psu-panels-SKP.zip http://3dwrx.com/TrueUp/mks_psu-panels-STL.zip contains: PSU hanger 2 piece MKS top 2 piece MKS...
Correct. I use M6 1mm pitch on the Onez with not gear reduction. I used 8mm on the TrueUp simply because they are more exposed on this design. I...
The zip files for downloading the STL, SKP and Assembled SKP files are at the bottom of the build page OneZ i3
Chris!!! And I thought I was running a streak of bum luck! I think I'll get a 6 pack and celebrate tonight - my luck's not nearly as bad as...
Printing the last changed item. I actually changed a half dozen pieces to make assembly easier (and make explaining assembly easier o_O ). Need to...
The reason for two nylon glides is that the body is not centered with the Z rail by the glides, it is centered by the Z screw. The glides are...
Aesthetics? Hmmm.... I like his better.. This the assembled parts http://3dwrx.com/openbuilds/OpenXY/assembly.skp
Take a look at Josh Pierce's design for a stationary bed. He's completed his. This design here is too expensive to build for my taste and I...
Structurally I think that would work. There are a couple of printed parts you'd need to change though concerning the controller box and PSU...
I just printed the nut_8mm4start2mm.stl leadscrew with 4 starts by silyavskiin with pla and it's a perfect fit for the openbuilds Tr8*8-2p (4...
