Separate names with a comma.
Some features disabled for guests. Register Today.
first to answer your question the pinouts are right...
the cncxpro is a Arduino board paired with stepper driver chips. So you can do what you want. in Arduino code you have to include a 'Stepper'...
750 is ok, just depends on what you plan on cutting when you get it done. Or I guess I should say how aggressive you plan on cutting without...
Hi guys/girls Starting a new project to help with another hobby I have (I have too many, just ask my wife!!!) Ham radio... I'm in starting phases...
[MEDIA]
No box, just a plexi glass plate I cut on the machine. No fans, but I did put heat sinks on the drivers.... I didn't have the heat sinks till...
No it's not, use 2 c-beams....
Virtual COM Port Drivers there you go...
since my next post should be a all finished project, I figured I would post a parts list....on most of this stuff if you search ebay you will find...
[ATTACH] [ATTACH] [ATTACH] getting much closer cut the cover plate with my c-beam machine no problems should be done soon....
last post on subject Do both resistors and caps =rc filter RC circuit - Wikipedia, the free encyclopedia also you can change your limit switches...
after a little more digging I found the website with the answer. At least it will be documented here the if I decide to add limit switches to my...
had to look it up I knew I had read about this problem before sound like you need pull up resistors No, it probably is NOT a "short", it is most...
the drivers will work for the motors you have... The motors will take up to 2.8 amp and the drivers will supply up to 2.0 amp. I have the same...
thanks Steve. I need to mount some switches and give it a try.
Thanks Steve Makes sense. So how do you do it? home is something like -10x -10y? then zero is just off from that? Can you kind of run thru the...
Steve What is the point? Do you always hold the material down in the same place? What I do is hold down the material I'm going to cut, then I...
Pretty cool!!! plexi doesn't seem strong enough for chain. what cha making?
Too much preload on the bearings? too low of current for the steppers? Did you adjust the current on the stepper sticks? Pololu - Video: Setting...
I don't use either. They aren't needed in my opinion.... But most guys use 1 per axis then software limit, I think.... The first few days of...
