Separate names with a comma.
Some features disabled for guests. Register Today.
Thanks, I will check out Robo 3D's filament.
Much cleaner! Thanks. Already signed up. You might add the history of why it was created and link back to this thread. I added an about page....
More fun facts; if you are designing your own parts: Double wall thickness is 0.9mm and 4x wall is 1.8mm. This keeps the passes close together...
Your manual build plate manipulation is not something normal. I have not seen this behavior on 6 printers. This is what should happened: The...
I wish I knew how to mess with the Wiki.
I'm thinking an internal wiring with a momentary pushbutton switch on the panel may just do the trick. If this technique pans out, you can hold...
The Cube3 is much better at printing organic shapes that it is in printing geometric shapes. I make a lot of "cubical" things and there are...
Cube 3 uses 1.75 filament but it is more like 1.70mm. I tried an ebay off-brand and it was way to stiff to feed through the stock feeder. Before...
Interesting, thanks. Now to salvage some chips and a clever way to hold everything in place. Anyone come up with a good budget filament that is...
MeshMixer is a facet based model manipulator. One of its features is supports. You output files for the Cube software.
Just put two rooks on the plate in the software and merge them half way or something. Each can be assigned their own color. You can also use...
And one other note for posterity: The gap calibration actually makes use of the label attached to the brown Mylar leaf. According to 3D Systems...
Even 3D systems uses Meshmixer for making supports. It is a bit tricky and am still tweaking it, but try making a cross and get the settings t...
I'm surprised this thread hadn't hit on the heater error that stops prints dead in their tracks. Any consensus on this one?
Congrats on the successful rook print! You do know that the build plate only has one position, right? :) On the switch... On a previous test I...
The belt should not shed many particles at all. In my case, the left and right upper shelves were massively dusted in the unit that was failing....
I'm still on 7. Only issues I have is that the 4.03 software is really hard on the NVidia card. Already blew out one GPU and get constant kernel...
After the shift error, the prints are still self centering.
Let's see if this works... When you get your new printer, look here before anything else: Cube3 - Printhead carrier cracked by Tom Dirriwachter...
Prior to belt fraying. White unit #2.
