Separate names with a comma.
Some features disabled for guests. Register Today.
One cure I have found for this when possible, is if you have holes that need to be drilled in your part, do that tool path first. Then use the...
I currently use Nema 23 270 oz motors on mine and have no issues cutting aluminum. That being said, I am upgrading and upsizing that machine...
To add to what Peter said, if you home, and know the position your XY zero is from home, and a job fails part way through, there is a chance it...
Maybe this can help. Making custom length timing belt loops
I am out of town for work right now, but I will message you when i get a chance to look at the file for the plate.
You can load up a full sheet. The space between should be approximately (a little over) 1350mm (53") if my math is right.
I built a CNC lathe. I do not use dust extraction because it was cumbersome for what I was doing, and it did not make sense to me for a lathe. I...
Wow! 160 inches per minute is a fast cutting feed rate. That is 4064mm/minute for us metric users. But I guess that just depends on how deep...
Excellent question. I can not 100% confirm, but I believe it comes with everything you need to get started. All steppers, blackbox, Router11,...
This is awesome! I was thinking of automating a table saw fence when I get done with the 3 other builds I have going right now.
You do not need to, grbl works with NEMA 17's just fine. The only grbl settings you would have to change is if the NEMA 17's had a different...
This is for a CO2 laser (K40) but it should work just fine for a diode. K40 12x24in rebuild (In Original Case) I am currently using a lot of his...
I rarely cut wood and the stuff I cut does not curl up. So, I never considered magnets. In this video he has a jig sticking to the bed with...
The one I am building for my Z axis K40 Lift table will be made of Harbor Freight hacksaw blades like these $4.99 for 50 of them. 12 in. 24 TPI...
That is what I have as well.
I would think that if you used those designed for medical use (thus meeting workplace safety specs) you would be OK. You just need to match them...
Brilliant! Why did I not think about this on my lathe. I just put a push button on the side of the enclosure and manually press it for Y.
They will have the same values.
It seems slightly (ever so slightly) off in one direction. If you have a V-bit, try this. If you are calibrating by measuring cuts, you will...
Ha! I was wondering what kept the proper space when I was looking at the Fusion 360 document last night. I thought I was going crazy. I was going...
