Separate names with a comma.
Some features disabled for guests. Register Today.
I vote bigger shop. Most of us need one of those.
The easiest plug and play system with high quality drivers is the Blackbox. You will find the customer support superior. More info on connecting...
Too bad Elaire does not make a precision Makita collet smaller than 3mm. You can get a 1/8th to 1/16th collet reducer. It is cheaper than the...
To make this part [ATTACH] [ATTACH] I basically did this (cut beyond) on my fixture I showed above. [ATTACH]
Get the endmill, or do as Gary said with a Vbit and drill press. HDPE cuts like butter. The other more expensive option is to buy the RoutER11,...
Actually, in Estlcam, you can manually select where it cuts, so you do not have to lie. Just make the paths go beyond by more than the endmill...
Easy way is to lie to your cam and make your .dxf file larger on the side you do not want cut so the endmill goes around without touching it....
If you are using a cheap Chinese knock-off CNC shield, the pinout for GRBL 0.9 and up is wrong for one of the limit switches. See the gnea GRBL...
Of course if the spindle is 220v and everything else is 110v then you can't utilize both plugs so the two separate sets of wires from the Blackbox...
I would think that you could just run another set of wires to the IOT power strip. Or plug both tools (pump and spindle) into the IOT strip and...
Christmas must have cleared them out. I have one and like it a lot.
I got a really nice new Sharkbits down cut endmill for Christmas. I bet it would have worked great for wood. Not so much on aluminum when you are...
Interestingly I noticed the other day that there is a link to Carveco on OpenBuilds control so that has to be a good sign. [ATTACH] It says they...
At this point, and without seeing it first hand, I would guess it is thermal. The nice thing about a BlackBox -- and I say this as someone who...
Ok. That makes sense. Thanks.
I actually had a house box fan blowing on mine really close and they still overheated on longer cuts.
How does this work? I would think that if you move the center of the router one direction, you gain in that direction, but loose in the other....
I had similar issues when my DRV8825 drivers on my first controller would overheat which is the reason I upgraded to the DQ542MA drivers. But...
So all the motor coils are properly paired? No loose wires? Most likely not since it appears to move properly, but an intermittent connection of...
If it is one axis and it is off by varying amounts, is there a chance your X axis shaft coupler is loose?
