Separate names with a comma.
Some features disabled for guests. Register Today.
whats the max character length set to in UGS? are the lines in your code reaching 50+ characters including spaces
Can you share a screenshot of the drawing? I think you might be right with 15's, i was looking at the v-slot the other day and realized that 9mm...
You would need to look at the driver(s) you have and RTFM ;)
Personally I would not risk a $120 board when a $16 arduino Uno can do this, save the xPro for another project.. it's perfect for lower power more...
I would think 9 would be size appropriate, the 15 and 25 would be so huge in comparison to the machine.. You can model the parts easy enough using...
I can not get slotting to work reliably with aluminum either. I have done 1/2" 6061 with trochoidal milling using Estlcam in 3 passes (1/8" bit),...
Having to disassemble and re-assemble many times due to forgotten T-nuts is an openbuilds right of passage! So you are doing it right ;)
XPro is stand alone (has built in drivers) does not have outputs for external drivers, all you need is a $16 Arduino Uno for that.
They have a good selection of these at http://www.omc-stepperonline.com/ I've been thinking one of these would make for a nice compact Z axis drive.
Yes for sure, even worse is my 100 tooth 10" aluminum cutting table saw blade, makes these beautiful square foil chips that flutter through the...
4560mm/min? that's screaming fast, but my guess is your X motor pulley setscrew is not set tight on the flat of the stepper shaft. check the...
If you don't use glue or double sided tape why even dual belt? reminded me of the Flaming Lips "She Don't use Jelly" song!
I use a modified harbor freight 2HP DC (not known for the best dynamic pressure), made into a thien baffle type, and I choked my router...
What micro steps are you running? also post your GRBL $$ settings that is rough! You should probably start a new thread for yourself, or get this...
Is it for this, Link to the part...? a 15/32" drill will do it. they recommend a drill guide (access hole jig), i can't find one for the 20 series!
The motors being energized and locking into place..
yes, this is how most Y's are setup with two motors.
Edit; i re-read what you wrote and yes this is confusing !! weather it's A - B or B- A makes no difference, as long as A's are together in some...
David the Swarfer post on setting up uno
I don't know how true it is but most people will say the true Uno has better luck with data rates. You might have issues with the clone. The real...
