Separate names with a comma.
Some features disabled for guests. Register Today.
The hardest part for me was finding free to cheap software that i was happy with and performed well, at first it was quite a struggle, now i'm in...
Thanks David, good to know the limit is 80, I did show the screenshot of the location above, for the latest ugs platform version. Works like a...
Ok Thanks, i counted and had 59 characters at one point.. use arduino uno, grbl 1.1 post setting on estlcam, my spindle is manual speed (makita...
Not doing the feed and speed every line, but when it does with the helical drill its too long (over 50 at least), and there are spaces.. just not...
Julius! thanks, I don't know why i didn't notice that, i'll see in Estlcam how i can stop that every line.. but for now i made the commandLength...
I'm using UGS platform (32), doesn't matter what version i tried a few of them including the latest nightly, and i keep getting this error (below)...
That pic i posted is from the spark website.
is there a picture of the correct graphic? is this one correct? [ATTACH]
Could that explain his motor heat issue too?
I had a Grbl shield on the x-carve, worked fine even using two Y steppers on one channel, the real "grbl shield does something like 2.5A per...
that stainless one is nice, but costs as much as a stepper!
ebay 8mm x 3/8"
Resurrecting this old thread, Been using the latest Estlcam, Christian, you are a genius! Really makes cutting aluminum with an OX an easy and...
Nice, i would love to see more pics like of the gantry and how you did the x axis rack engagement.
yeah so the 2000 on the driver is steps per 360deg of rotation.. so at 2000 you are at 1/10 micro step. the setting in the machine setup on the...
Cool build, is that cncrouterparts rack and pinion?
you mean loctite CA glue? might peal right off.. might not, can always flip the extrusion ;)
yes you need the extra thickness to make it mesh well, what glue did you use?
The lower belt should be glued down, but with about 0.5mm in-between the belt and the v-slot extrusion, some use double sided tape of the right...
For the bumps, did it start after dual belting? what method of securing the bottom belt did you use? i'm thinking maybe the belts are not meshing...
