Separate names with a comma.
Some features disabled for guests. Register Today.
What I'm suggesting is the one motorized Y beam and two support beams (one on either side towards edge of table). So no balancing act. You...
Wouldn't the machinist wax make the resulting material soft or weak ? In any case, in the home brewed form it is a very thick material which can...
Never tried ... still collecting bottle caps. I suspect you would have to make certain not to have air bubbles and such. But you would also need...
Let's have him do a build here at OB and show some of his work with the portable OX ...
The more I read about doubling the Y, using two motorized tracks, the more I'm thinking at keeping one motorized with a hefty NEMA23, dead center...
If you plan on not doing any larger parts, then I would suggest you make your X axis the shortest/narrowest by going with up to 750mm, using...
I used this baby, without the plunge holder, on myOX : [ATTACH] It takes 1/4" and 1/2" standard and you can use a 1/8" adapter (Amana) for the...
Nice ... so what about some of those lethal projects of yours ? Anything safe enough (as if 'lethal' and 'safe' can be used to describe the same...
Here's an easy way to remember which is which, at least for me. Hold your left hand before you. Thumb pointing up, that's your Z axis, up is...
One way to make the machine taller, given it already has about 6" of Z, is to mount the 'table' lower, thus increasing working depth from 1.25" to...
