Separate names with a comma.
Some features disabled for guests. Register Today.
Thanks for the quick reply and feedback on this. I was eyeing the SainSmart as well, although there are many alternatives for much less ... many...
I'm in a situation where I need to replace a v2 xPro with a fizzled Z driver. It randomly stalls the respective stepper. I tested with the X...
Trying to read up on external drivers with the xPro. I would be hybrid as well, X and Y off the xPro itself and the Z of the DQ. Not sure if...
I'll take an other look at the v1 to see if I can get the USB port stable enough for most jobs. I do have one which might run ~10 hours, so not...
It must be the Z driver on the v2 CNC xPro which is acting up. I just reconnected the X stepper to the Z driver, and vice versa. The problem of...
I was thinking about going through the exercise of at least wiring one of the other steppers to the Z driver and see if the problem follows the...
It's been a while ... again. Just as I got started into taking a few orders from friends and friends of friends, myOX decided to act up again....
Well, time does fly ! Been under the weather for a while, but getting back into action ... especially with myOX and the C-Beam. I will need to...
Been a bit off helath wise, but still ticking. Time just seems to fly. I'll be catching up on things with myOX, the C-Beam and OpenBuilds. I...
Well, someone is making some of it work: SprayPrinter "climbs walls" to spray colour graffiti. Check a recent article here : SprayPrinter's...
8 lbs 10 oz
Check your settings for rapids and acceleration, it might be the issue. I forget what they are for that version of GRBL. Too high and the steppers...
Did the test a bit earlier tonight. Sorry for the delay. Reconnected the V2 to myOX : just power (24V), the Z driver to Z stepper and the USB....
I'll give that a try probably late tomorrow as I'm curious as well. To be honest, I'm not certain how I got to use 150 for that parameter. I'm...
When I used the V1 CNC xPro, which has GRBL 0.8c, I had the $5 (default seek rate - how fast it moves for rapids) set at 3500 mm/min. This...
Looks like myOX is back in action ! There is no more bind/unbind or freeze ... at least using the original V1 CNC xPro. From what I can gather...
Having strayed and stayed away from myOX for a while, the sun shining with temperatures reached 19c, birds singing, ... this long weekend, I went...
Well, I'll be a monkey's uncle ... Redid the tests on the myOX, this time using the old V1 CNC xPro (with original 0.8c) So far, connected only...
Did a bit more testing using the V2 CNC xPro on myOX. First, I changed the wiring to the Z stepper (third time now), but kept the same wiring to...
Yes, the V1 board is actually through a KickStarter pledge - one of my very first pledges (now near 50). Just checked, I'm contributor #81. I...
