Separate names with a comma.
Some features disabled for guests. Register Today.
Here it is : G-code Ripper from www.scorchworks.com. It reads, scales, rotates, splits and wraps G-code. The last two were what I was most...
They are not always in sockets to do easy swaps of the those ICs. Also, there seems to be a G code to mirror about any plane/center point (!?) :...
Here's the second part. The board slides down about 13", the table and previous job marks aligned before starting routing the rest of the...
True. Changing once a day gives you a good 27 years, plenty as one is not likely to change one of these settings every day. However, building...
Don't forget that the EEPROM can only be written to so many times before it will eventually falter. I forget what the number of times is. It is...
Here is part 1 of 2 of the video. The 2nd part should be all uploaded in about 2 hours (slow DSL uplink, sorry). [MEDIA] This is the routing of...
[Revised 2016-03-14 - see bottom] This is my adventure with an OX build and the V-slot system. Grab a cup of coffee and enjoy (at least the...
To get the conversation back to myOX, I have worked on and off with it for the last little while trying to work out a few 'bugs' ... The table is...
Indeed those thinner material are always far from perfectly flat. Even 1/2" ply tends to "curl" ... I just cut a Croquignole game out of a...
There is a hobbyist version DeskProto "true multi 5 axis" CAM software for about $350 (US, instead of ... 1000$ to get the right to use in a...
Great for working with engraving and cutouts, making sure the work piece is flat against table. How is it working out with, say detail engraving...
Look at he wiring for he X stepper to the controller you have. There should be two pairs of colored wires between the two. Given the other...
Sorry about that, I thought the cells would still adjust. I was off (to the South) for a while, so I'll catch up with things ... I will be...
Notice, as well, how they have a Nema 23 CNC Stepper Motor 2.4Nm(340oz.in) 1.8A 23HS41-1804S with nearly half the current load (amps) but 50% more...
Yes, do leave a post in the stepper section and even the controller threads for feedback as not all threads are being followed by all who could...
I'm no expert and, like you, I'm still struggling to understand the laws that are at work to answer your question. An often quoted source on the...
Hmmm ... if you are not doing changes in depth, why not use SketchUP with SketchUcam and your V-bit to trace a line (your letters) rather than an...
Excellent find. Thanks for the share.
That's fantastic feedback. Thanks for the list. Some of your suggestions are needed updates, while others get into a specific design and its...
Odd. I will have to check the ZIP file tonight and possibly refresh the upload for some reason. I might sneak in a few tweaks ... Sorry for...
