Separate names with a comma.
Some features disabled for guests. Register Today.
If the motors aren't synced after doing Peter's suggested tests (if you try it), you may need to bring that up with your motor supplier.
I am cutting 3D wood carves at about 5000mm/min, but that is with a 40% stepover roughing pass and 4000mm/min with a 2mm ball end mill at a 10%...
Vermont gages are cheap and accurate. I have 1/4 inch version. 1/4" vermont gage - Google Shopping
Check your email spam folder.
I have found that about 2500 mm/minute with a depth of cut of half the diameter of the end mill works well for me for all types of wood and...
Desktop. I did not think I would need to cut larger than the 25" restriction. If I do need to, I can use tool path tiling. I figured I can upgrade...
I believe the Er11 only goes up to 7mm.
I have tried other software and honestly, Vectric Vcarve Desktop is well worth the price. If you ever want to upgrade to VCarve Pro, you just pay...
Now I can carve my hiking maps out of MDF. They may be a bit heavier than I am used to, but way cooler! ;) I was just looking at the 3D...
I have never had that problem. Have you updated the software recently? They just put out a new update. Maybe reinstall with the new update.
Subtract 500 mm from the 1515 profile. You can enter custom dimensions. All my machines are custom and it was a simple process.
I believe you can. I watched this video the other day and he touched on changing the height. If you have not lost your XY zero point, you should...
What is it sitting on? Is the table level? It may be an issue with the table. This is where a torsion box table top helps. You can get a very flat...
That is what I used on my first CNC build. It has been going strong for 5 years.
You may hate it, but some people requested it. It is helpful for those that charge for their services by the hour. The first time I noticed it...
I will set mine in the center if I am adding an engraving to an object. I place the XY 0 point in the center of the engraving.
Is there any support for the 1500x1500 plywood other than the perimeter?
I am no longer proficient with Fusion 360 for CAM, so sadly I can't help there. However, there may be something wrong with an offset in your set-up.
