Separate names with a comma.
Some features disabled for guests. Register Today.
Another option is Estlcam. It is free, but the $59 paid for option is better because the free version reminds you it is free when you are...
The cnc shield v3 is an an obsolete Chinese knock-off of the Protoneer board. The pin-outs are not accurate after GRBL 0.8. If you really want...
If you like the way you generate your Gcode in OpenBuilds CAM, Estlcam is very, very similar, but there options to change the order of your tool...
This is great. I would love to do this for my C02 laser.
How flat is your dining room floor? That was the flattest surface I could find when I built mine so I did it there and used myself and some...
I can not get it to run on my Windows 7 laptop either. It just shows a white screen. I was hoping I could jut jus the old laptop for my lathe,...
I take 3D objects/models and split them down into smaller pieces quite often for cutting. So if it a model you have purchased and only comes to...
What is the other 4%? ;) Or are those the ferrites?:) [MEDIA]
I looked and could not find any. I am doing a similar conversion and did not feel good about using 3D printed pulleys. one thought I had was to...
Is the 1/8" endmill wider than the lines of the letters by chance? That would cause them to get to close to each other.
I did mine the same way, but I didn't slum it at the Dollar Store. No sir. My 48" aluminum measuring stick is Pittsburg branded from Harbor...
Make your own tap from a piece of the 12 mm screw if you have leftover. When I built my CNC router I used 1/2" - 10 five start screws and just...
Here is a link to the .step parts. It is not the whole machine, but I used these parts to quickly mock up a custom LEAD 1510 with High Z and...
At the time, the black box didn't exist. I used the arduino with some good DQ542 MA drivers. Then I had to figure out all the wiring. 4 DQ542MA...
He has a 3D model available to download. All the parts are visible in the assembly. K40 Rebuild in Original Enclosure (12x24in Cut Area) by...
Is this the same question asked on Facebook? If so, I believe it was because the tool paths generated with OpenBuilds CAM were generated for an...
How much if a lip is left? I use a 3/4" surfacing bit and can surface my spoilboard without leaving a lip on three of the four sides. The fourth...
How did you get the P8.5? That is where your 8.5 second delay is. This is what Vectric spits out for me when I use the Grbl mm post processor: T1...
"Looks awesome!"
I use those. I was about to suggest them, but I see you already found them.
