Separate names with a comma.
Some features disabled for guests. Register Today.
This happened to me once. The shop vac is now plugged into a separate circuit.
I normally use Estlcam for both controlling the CNC and for generating my CAM and I have never had an issue opening any .dxf or .svg I have...
Are you trying to make a bunch of tiny stickers out of each 4" by 4" polyester sticker? If not, you can buy 4" by 4" white polyester stickers in...
Sorry. I put that picture in another post a few weeks ago. The "before" was the length of endmills I used for carving on the lathe which limited...
It may be bit quality, or it may be how they are cutting. I cut at 4000mm/min with a 1/8" ball nose with no issues at all. But, I am only stepping...
If it is with smaller diameter bits, it is probably because they are flexing when you are pushing them hard. You can actually see the bend in them.
I run at 2500mm/min (100 ipm) on wood and plastics all the time. With a ball nose I am doing about twice that fast.
That should work just fine.
This is why I now have a lathe. I had a Blackbox sitting for a year waiting to be appreciated along with some 270 oz steppers that are being...
Look at this https://raw.githubusercontent.com/Spark-Concepts/xPRO/master/wiki/xPRO pinout.jpg. The Tx and Rx pins are available. Just find a...
Your lead screw may not be long enough then. I could be wrong, but check a model in Sketch-up first.
That is how I fix everything. That is my only IT skill.
I am impressed. You got extra endmill added to your endmill! I have yet to get a cheap 1/8" endmill to hit the 3.175mm mark. The closest so far...
I used a similar one, but I had to provide my own cord and wire it myself. I like it, but that Kreq is a good choice and you get more outlets....
On my Lathe build I had issues but realized that I did not have the X axis beams attached square to the uprights. There was a small gap where the...
That was a twofer! How to use the probe properly and how to use the Interface. Great video.
What controller are you using? The company that made it will have a wiring diagram.
He hasn't been on this forum for about a year- and we miss him - but I would assume that he designed his plates to where the screw mount is lined...
Wearing glasses when nearby is always smart. The reflected light is still dangerous, but just not as much. I do not know the numbers, for a...
Actually closer to a minute because it took Fusion about 30 seconds to load. :) I forgot you could draw in OpenBuilds CAM.
