Separate names with a comma.
Some features disabled for guests. Register Today.
It is probably what Peter mentioned above and I know you checked your settings, but Vcarve gives you the option of setting zero on the spoil board...
One thing I did on mine when I built it was -- prior to surfacing for the first time -- I used a square to adjust the spindle mount until it was...
The openbuilds docs for the three wire and the Blackbox show it needs 5V -24V docs:blackbox:connect-xtension-limit [OpenBuilds Documentation]...
I have been happy with their end mills, but if I am not mistaken, mine were a hair undersized as well. In fact most end mills I have are a hair...
I did not know I wanted to try this until now. Thanks. I am rebuilding my main CNC and am doing it LEAD high Z style. I my give this a try? Have...
I do not know. I have never seen one of those boards in person. Most likely on a 5v power pin.
I do not see why they could't be used with two wires. But do so at your own risk. You connect the signal (SIG) wire and the ground (GND), Do NOT...
You just need to extract the zip file and click on the Application file. [ATTACH]
Free. G-Code to DXF with G-Code Ripper I do not know how well it will work. I just tried it and it sort of worked. It does not have all the...
If the x is 750, it will be more rigid. What do you plan to cut? If my main objective was to cut only items that would fit that dimension, I...
The BlackBox is "plug and play" and is very easy to wire up. With the separate M542 drivers and an Arduino you have to wire everything else up...
It isn't useless travel if you are engraving on thicker work stock or boxes. If you read the product description, it is for: I built a rotary...
1. My spoil board is only as wide as I can reach with a 3/4" surfacing bit. So, you can cut it smaller so it can all get surfaced, or leave it as...
I will add to this as someone that jumped into CNC without reading much about it and not having a complete understanding of Gcode. First and...
Which controller did you get? I use an Xbox controller with my machine that uses Estlcam, but I would love to add another controller to my lathe....
This probably won't help you (especially if you do not use Vectric products), but I am impressed by how close the time estimate is for a job in...
It is 1/4" (actually 6.5 mm) aluminum. It is weird. I go buy aluminum and sometimes it is 6.5 mm and sometimes it is closer to 1/4 inch. :) As...
I have looked as the AWC7824 as well. I have pretty much looked at them all. They are not that much more than some of the other "K40 drop in...
Arduino IDE perhaps?
Is there any chance that the spacing between the two y beams in the front are too close together, or too far apart? There may be enough flex that...
