Separate names with a comma.
Some features disabled for guests. Register Today.
Protodrake was fine, but all the V-slot and such seem to go faster than it is produced. It took a while to get all the parts together. If you...
The router, out of the box is about 4.2kg. This includes the standard router base which I will obviously remove. Stripped, I'm thinking about...
Don't forget 1500mm is actually nearly 5'. MyOX actually has a working area of (a bit) more than 2' x 4' ... depending mostly on the...
I'm back ! It's summer and I should have plenty of time to get things back on track with myOX. I'll need to get a few t-nuts to make the work...
It was about 10 hours (!) of train, not counting about 1h30 of car for door to door travel when it normally takes me only 8 hours by car. WiFi on...
And using a NEMA 17 for the Z-axis. I'll have specs and such in the build details of "myOX" ... probably during the train ride Monday.
Depending on the day, yes. At times, although rarely, it's like 75$ real money. ;) Canadian Tire also has its own money (instead of points 1 or...
I could not resist, I bought a MasterCraft 12A plunge digital router with display. It is similar to Dewalt's DWP611 and DW618 or similar... It...
I was thinking about that approach as well. But wanting to get a bit more travel on Z-axis I am looking at ways to make it firmer as well. The Y...
Me too ... It looks solid enough, but I can see the parallel 20x60 have a bit of gap towards the centre. Some flexing might come in play once...
Serge E. published a new build: This is the story of me building myOX - my version of the "ideal" OX. I wanted a machine which could...
Indeed, sweet prices and incredible packaging. Cost of shipping in my case, similar order, was a bit steep, but had the package not stop through...
Your plates worked like a charm with the NEMA 23s I got from StepperOnline (lots of choices, China). I'm using a 20x60 instead of the 20x40 for...
I'm going for the full 1500 mm X axis but half in Y with the same hopes of potentially working 4' x however long I can get a table to hold and...
That's great. I started mine on the same basis as you : weekends to progress with the OX between the other weekend activities. Actually got a...
3D graffiti : sneak the cnc pole carver over telephone or light poles late nights and... With the right bits, it should be able to handle the...
Vertical milling/routing with a lot less ... Y axis. Move it up against a wall and carve into the drywall or plaster ? Would it still be Z axis...
There are kits for anodizing "at home". Mark has one listed in the ressources here. But it is not cheap (was it 500+$ just to get started ?). It...
I finally have all the parts for my OX - somehow got M3 instead of M5 for some screws (saga continues). Then found a local Fastenal outlet just...
Finally got my steppers and power supply ! StepperOnline helped from China with the tracking and pushing DHL at this end. The good news is...
