Separate names with a comma.
Some features disabled for guests. Register Today.
I bought both sets of the Elaire. They are awesome and the metric opens you up to all kinds of endmill possibilities plus the bigger (8mm)...
Have you checked to make sure all wiring is still connected properly? Something may have come loose and is shorting out.
The cutting area in the Y direction is also a little bit larger on the LEAD due to the 125mm plates vs the larger Workbee plates if comparing two...
What controller do you have? If it is the BlackBox, refer to the BlackBox documentation. If you are using another controller, refer to its...
Are you sure there isn't a loose wire if you are getting vibration/resonance? My nema 23s on my CNC router are barely louder that the nema 17s on...
It looks like the cut is right, all the OpenBuilds controller is doing is cutting a tool path. It is up to you as to where to zero it on your...
Is everything still moving but just noisily? Like you previously said?
I thought the OpenBuilds CAM and Control were Mac compatible. I do not use Macs so I can only offer this link for other ways to control your...
Have you checked for loose wires yet? Power off the black box when you do so you do not fry any electronics.
Sorry, I do not know what that means. I have a BlackBox, but the machine it is for has yet to be built so I have not taken the time to read the...
The color pairs should be right then. Is there a chance a wire is loose on the offending motor?
Yes. I believe so. Almost five years in to this craziness and I still have been too lazy to ever hook up my limit switches up to the controller....
Wire colors do not matter, the wires need to be paired properly. If they are OpenBuilds steppers, the color codes should work, but not all...
Are your switches enabled in your GRBL settings? More info here at gnea/grbl and are your limit switches configured for normally open or normally...
Will you hear the steppers while actually cutting things? I have DQ542MA drivers and an Arduino controlling them with GRBL and they do not seem...
That is what I got when measuring the length of the threaded hole in the middle. There is a chance it may be off by a millimeter or so if there...
I measured it at 24mm, if you do not have easy access to SKetchup.
I noticed mine roll better with weight on them too. With cleaning and the application of oil, some of mine would roll real smooth on their own,...
If you have a spindle that can fit a 3/8" endmill, you can find endmills in the 7 inch overall range. I have not seen 1/4 inch endmills in...
Just finished all 16 linear bearings. They run much smoother now after cleaning.
