Separate names with a comma.
Some features disabled for guests. Register Today.
It then becomes a rack and pinion. The second is glued down to the rails so it can't stretch. If the teeth are meshing then you should get good...
I have an "iGaging ABSOLUTE ORIGIN 0-12" Digital Electronic Caliper" and like it. It is not what you asked about, but I ave not had an issue with...
I also used a camera to take a picture as straight on as possible so I could zoom in and see it better, but that was before I got glasses.
Have you checked your power settings and made the recommended changes: OpenBuilds BlackBox 4X Documentation
You should be able to, but it s a much shorter distance and my experience harder to read and touchier. I have found a V bit and a ruler to be the...
Where are your plans? I am not seeing any links, nor am I seeing any "builds" in your profile.
I have done the same thing. I had to order twice in the past month. I don't know how I can forget to order things as prominent as the actual...
That is not for credit to Ooznest. That is for making people think it is an actual Ooznest product. :)
Most people document their modifications to a CNC routers here in the CNC router section of this forum if they choose to document it in the...
If everything is connected properly, all you screws holding the shafts and lead screws are tight, you should be all set. The first thing you...
Looks real good. I was cutting aluminum last night, as well. Very similar settings with a 3/16" cutter. I was happy with my results too.
Those are beautiful projects! Yeah, I agree. I like seeing projects. But this is also a very helpful customer service forum, and a lot of folks...
I think they are all good choices. I would have done the same. In fact I recently purchased the high torque steppers to upgrade my current build....
That is cool! Thanks for sharing.
The shark bits are nice but as a hobbyist beginner I would shed a ton of tears breaking them. For cutting wood, IMHO a two flute (straight...
It only does that on circles? I just recently purchased V-Carve and am not real familiar with it. Have you tried ramping into the cut? Although...
Disclaimer: I have a Blackbox, but I have not tried this since I have yet to use it. It is for a lathe I have not got around to building yet....
It could be loose wiring to the motors, or it might be the CNC shield and the DRV8825 drivers that came with it. They are not designed for a...
How fast and how deep are you plunging?
Flat endmills and ramp in at about 6 degrees is what has worked for me with aluminum. I also find that moving up from 3.175 mm cutter to a...
