Separate names with a comma.
Some features disabled for guests. Register Today.
One issue was the alignment of the magnets to the hall effects. When I designed the mounts I assumed that they should have been centered....
I haven't been updating here much, but the project is moving along. I'll post updated pics when I wake up. This post is more about numbers. I...
@Peter Van Der Walt I've been gone for a while so I apologize for the delayed response. I definitely see your counter points. I do still stand...
I've been using GRBL Panel since I started working with the Openbuild platform as I found it to be the best available. The issue is that it is...
You need to calibrate it. Those numbers are ideal everything to exact spec numbers. Move the machine to one end as far as it can go. Use the...
I'm officially upping the voltage with a Meanwell SE-450-48 (48V 9.4A). To support it, I could have continued using the MW LRS-350-24 (24V...
My current desktop build: AMD 2700X ASRock X470 Taichi 32gb 3200mhz Corsair RAM MSI GTX 970 (waiting for the 2070 Super cards) All SSD, no spinny...
Dell isn't a system. It's a manufacturer. However they run Windows. Mac used Mac OS. There is also Linux. F360 works on both Windows (64bit)...
Were you able to complete a test cut?
I did some more messing around and found some pretty shocking results. 1) I decided to increase micro stepping from 1/4 back to 1/8. This is...
No one will be able to help unless you provide some information about your setup. What CAM software are you trying to use? What CAD software are...
The spindle cooling seems to not be leaking, so that's good. For that, I'm just using distilled water with a little antifreeze. My relay board...
The Optiplex 9020 isn't a specific build so it's hard to really say. At best, it's hardware from 2013. As long as it's 64bit, it should be fine....
What you probably want is a drop down z axis with the gantry sitting directly on elevatet y axis rails
What you are talking about is a rising gantry. The more parts you have, the more room there is for error to develop. If you really want to go...