Separate names with a comma.
Some features disabled for guests. Register Today.
Lots of limit mount tweaking. I also printed a small section of 3060 (exact product of course) to test fit. The screw adjusted trigger is for...
It sounds like you're designing around an impossibility as a 16mm ballscrew will never fit inside the rails. 12mm fits, but you don't want to use...
You can eliminate the two base mounting plates by rotating your lower c beams 90 degrees facing outward. After doing this, ditch the second rail...
The airflow has been completely revised. There are 120mm fans on either side blowing in. This still may not be enough for the radiator, so there...
If I can throw my 2ยข in, HGH15 is overkill to the point of being detrimental. Unless you already have it, you can step down to MGN15 or MGN12....
It would just be a wider "dual" z axis with a separate stepper for height control on the the probe. 2020 with some mini v wheels would do just...
Just use anything 304 or 316. Out of respect for the site, I won't post any links, but there are plenty of suppliers. As for t-nuts, it won't be...
Having tool height sensing is an invaluable feature. I used a thin strip of metal near the homing point with some custom code on my Sphinx and...
Just for gits and shiggles, this is with the FM30. I raised the gantry 30mm. I would need a few extra extrusions, but for the most part, the...
I really like the FM30F from CNCDepot. It will even fit this machine nicely. Only problem is it's $4000. @Rob Taylor I haven't checked in on...
Thank you! This was a heck of a design learning curve. From the other thread, I'm definitely considering stretching it now. Too many projects....
I saw this and immediately thought, "I need to make mine bigger." KRE Mill V3 - Concept Since our builds are so similar, I should mention a few...
Quick update: I really don't have much to show as of now. Things didn't quite go as intended (again), but the project is still moving along. I...
There is a printed spacer between two aluminum plates. I plan to print all of the plates initially, then switch over once I know everything is...
The texture is created from the anodizing process. I highly doubt there is any finishing process done after extrusion.
Are you looking for advice or are you wanting someone else to do all of the research and work to give you a complete solution? Do you even know...
Before and after 10mm extension. [ATTACH] [ATTACH] Control panel size comparison [ATTACH] These two shots are with the bed at max height....
Having the dimensionally critical parts in hand makes a heck of a difference. I was able to model the head, and confirm the mirror mounts and...
Everything about this is a bad idea. If you can't secure your laser beam, it's only a matter of time before you burn or blind...
The original Ruida panel design was larger than what I could print. Because of that, it would have been made in parts. The Trocen is small...
