Separate names with a comma.
Some features disabled for guests. Register Today.
YEET!
Silicone is lovely for tubing and wiring, but with only a 1mm wall thickness, it is guaranteed to kink. It's flexibility is a double edged sword....
I found it easier to constrain only one corner (two sides).
There's an option to leave it in numbered. That's what I meant to say.
Any shop that uses ATC's MUST have tool numbers. We don't have them though, so what do we do with the tool numbers? I used them to distinguish...
The acrylic bent perfectly!
ER32 spindles start in the 5kW range and use 380V. ER16 is about the max you should be using on this type of platform.
Adding linear rails won't really do anything. Linear positioning (wheels, rails, rods), linear motion (screws and belts), and the frame all play...
Pictures of the machine? What end mill?
It looks like you are trying to cut in a single pass. This has nothing to do with software. Without knowing anything about the machine, no one...
Good to hear!
Look at the picture @Peter Van Der Walt added. A relay has two different circuits. One circuit is a through put, meaning what goes in goes right...
I'm pretty sure that's your problem. There's no power to output because there is no power being input. It's a relay. If it were to try to pull...
@Alex Chambers Simply changing the water isn't enough. Bacteria and other micro organisms will grow if introduced to a system that won't kill...
Do you have a separate power supply going into the relay?
The upper "U" will be lined with led strips. I'll pick up some triangle stock to act as an inner splash shield for the bottom edge. I can...
I don't know if this is technically up to code, but I know there aren't any issues. With that said, only use it as reference. I made a giant...
I'll echo above. This has absolutely nothing to do with the machine or control software. You can tell the CAM software that you are using a...
Yes. If you wired your own electrical box, you can just tap the two hots and use the pump that you have. Either way, you should be running it...
Every form factor has its strengths and weaknesses, but I didn't see this one coming. The plate is 0.5" cast and started out at 13.875" x...
