Separate names with a comma.
Some features disabled for guests. Register Today.
The Dentist strikes!
Just use a five gallon bucket for cooling. As for which listing: find the collet size you want. find quad bearing make sure it has the "real"...
I agree with Rick IF space is allowed for a piston setup. If not, I do think a screw would be adequate. By screw, I do not mean the TR8x2 4...
The spindle only goes back as far as it goes. You can't change physics. Both Y and X axis consume 170mm of travel. That's a work area of...
I also agree that it's a nice video, but has it even been built? All I see is a sales link.
Put the lead screw in a drill and give it some alone time with some sand paper.
Only 2" cutting depth?
If you were planning on printing what you drew, it won't even be a quarter of the strength of the aluminum angle. A printed part can't be...
There's way more to it than just what it is made out of. I don't really like the MPCNC either, but the router head is at least support by both x...
It's pretty, but I highly doubt it's going to have any rigidity. What materials do you plan on cutting?
I honestly have no idea, but I regret nothing. :p
The Meanwell 24V PSU from the part store is more than enough. Even at a full 3A per motor, that's a 12A max which will never happen. Add smaller...
Can a build plate safely get that hot? That's +160*C (325*F).
Printed rough shape with cnc fine "polishing" is my guess. If so, the concept is nothing new, but here we're building two machines instead of...
OpenRail would let you implement the wheel concept on a surface that does not already have it. An example would be an plain aluminum bar, or...
You don't have to ram the machine into the ends. Just place a spacer between the end plate and the gantry plate. I use two identical pieces of...
It was suggested in a thread I made that having independent control of each axis is the way to go to avoid misalignment. Essentially, one stepper...
Did you ever get this build running? I'm curious about the overall rigidity. I have a surprisingly similar design, but smaller (260x260x435)....
And a bit of a tangent... I think that's all I can offer. Here can see just how much I rely on the O-flute, but I have used down to a 0.8mm 2...
Will do Gary! I can't talk without showing something though can I? :D This piece ultimately became scrap since I nicked it from the other side,...
