Separate names with a comma.
Some features disabled for guests. Register Today.
I would think that if it is not binding up, it is probably working.
The closest for Fusion I could find was this: hanskellner/Fusion360Image2Surface But I do not think it would work for what you want and I bet the...
Are you using belts to drive the Ox? If so are you using a 16 tooth pulley on the motors? If so is your microstepping set to 1/4? If you...
Here is the suggestion box :thumbsup:. Suggestions
What is your $100, $101 and $102 – [X,Y,Z] steps/mm in your Grbl settings?
@Richie800 When I used Fusion360 to generate my Gcode - or Sketchucam - I always picked the spoil board as the z- zero in the CAM portion of the...
I will try it when I get time.
Is there a chance your steps/mm setting is off by a factor of ten in your grbl settings?
I am a fan of the BlackBox, but if your funding is tight I would think your easiest and cheapest solution would be to buy one more of the type you...
Wow! 0.003" seems pretty good. I bet your tolerances are better than mine. I have never really got into the weeds in checking. I have cut a lot...
So what you are saying is after installing my new high torque steppers, I should finally get around to hooking up my limit switches. You have...
Here may be some ideas. Search for Inkjet printer parts - Instructables
Tom, Instructables has some great classes for free. They focus on Fusion 360 since it is owned by Autodesk. Both the CNC class and the 3D...
What I like about Fusion 360 is how easy it is to make .dxf files for my CAM software of choice (Estlcam). I can make one 3D part and print it...
I think the assumption was made because MPCNC suggests using the DRV8825 with a shield or RAMPS board. It is a fairly lightweight machine so the...
Well, since the question was about consensus, can you really shoot down any answers? After all, everyone is equally right since it is just an...
McMaster-Carr also has 3/8"-8 four start and 1/2"- 10 five-start screws available both move have 1/2" (12.7mm) of movement per revolution. I have...
I would suggest not using grub screws but substitute longer screws of the right diameter (see picture). If you strip the socket then you can...
In my opinion, a fixed table with a moving gantry due to versatility. For example, with tiling you can cut things much longer than the machine....
I do not know. I may sound dumb here (not the first time and won't be the last) but can you just rotate your project 90 degrees so the x axis is...
