Separate names with a comma.
Some features disabled for guests. Register Today.
Recently, I had a problem installing code on an Arduino nano. I got the same error I believe. When I looked there was a selection for "nano 328...
Crap. I ordered a few packs of those. I hope it's not my fault because I won't get to mine until after the holidays.
I would think you should be fine. That is a pretty commonly used size. Also, if one of the Chinese 65 mm mounts came with it, those are a...
That looks cool. I like the dual shaft center mounted stepper motor.
I do what you said on mine. - Jog up close to the hard stops - Disable the motors - Manually rotate the screw until both sides are up against...
Hear you go if you need a pattern for Fusion 360 or inkscape. http://www.scrollsaws.com/images/Lathe/LongworthChuckPlan.pdf I didn't know I...
Well, I just ordered everything I need that I do not have on hand. Three (C-beams 1500mm), and 8mm lead screw and nut for the z, some screws, and...
Now I have to do it...because I saw it. Now I am thinking the X axis needs to be higher. I didn't think of bowls!
I do not believe GRBL is capable of a 4th separate axis, just a slave.
Good find! As for anti-backlash nuts, they are easy (and fun) to make if anyone wants to try. Just order a screw longer than you need and make...
I have a 36 Volt supply and had a bunch of 12 V fans. I wired 3 in series. :)
I just saw it. I was thinking for people that do not want the hassle of sourcing the 1/2 inch screws and bearings etc... I use the 1/2"-10 five...
I started doing it with ABS because I was getting some warping and parts coming loose. In fact it works so well for me ABS has become my favorite...
If in the U.S., McMaster Carr has 5 start 1/2"-10 lead screws that work great. You will need larger bearings and couplers as well. 6.35mm to 12...
You should only need one for Homing. If using as limit switches, for Normally Open you use two in parallel on each end of the axis. If NC, then...
Thanks for the info. I have the right balloon wheels, it is the current biological propulsion system that is getting too old and worn out. I will...
I print PETG a lot. I put acetone on the build plate then take left over ABS rafts and smear it where I will be printing. I am using an Anycubic...
I have been kicking around the idea of a CNC lathe for about a year. Very few on the Builds section ever seem to get completed, so I hope to...
Thanks. The more I thought about it after my post the more I realized it would overly complicated my drive mechanism. I will give my chain and...
I am curious what the gear ratio is? I bought an electric motor and via a brain fart - it was way more than I needed - and I would like to slow...
