Separate names with a comma.
Some features disabled for guests. Register Today.
Sorry, I read your original post completely backwards. :oops:
@davels That 40mm increase is something like 60% increase in distance on the part of the machine that has the greatest leverage effect. 10mm...
Considering that 4x8 is the largest standard size (5x10 and 5x12 goes into specialty territory), you would not need a wider cut than 4ft....
Duplicating is a function of having a CNC. I think you are seriously overthinking it. Just put a rotary axis on any 3 axis machine. If you only...
Any cutting tool works by moving a cutting edge against material. On a lathe, the material spins against a fixed tool. On a mill, the tool spins...
I'm sure you've been making quite a few cuts with this. Can you comment on the rigidity of the single C-Beam X axis?
Ah I understand what you mean with the bolts now. I do agree with the gear statement. I initially thought you were saying to change the ratio....
having your lead-screw on the backsideof the x-axis is, in general not the best idea... in your case it is very bad indeed as I along with many...
The Mini Phox is, for the most part, complete. The only missing parts are limits and cable carrier, but that won't be difficult to add. The last...
Here's the offset setup. The x offset can be achieved with a 150mm pitch length belt. The standard belt is 210mm. And of course I had to start...
The exact relay with specs is posted in the original post. It's the JQC-3F.
The new store updates are really nice, but the one thing I was hoping for isn't there. Due to the nature of the hobby, I'm sure I'm not the only...
Sorry for not responding sooner. I'll double check to make sure the jumper is in the correct position. Thank you.
With these two negatives, I decided to come up with my own design. 1) I despise belts, therefore I do not like the Ox. 2) I built a Sphinx, but...
Although what Giarc said is very correct, it doesn't matter if we don't even know what your machine is. I can give you my settings, but that may...
I machine a lot of carbon. It doesn't require nearly as much machine as aluminum, but it still requires it's own "just right" settings as well as...
Doesn't it feel good? :D
We're here to help. Let's start with a few basic questions. How large of a work area do you need? What materials do you want to cut? Just...
The ACRO is a laser cutter that is not meant for milling. Nor does it actually have a z axis. Understand the difference between adjustment and...
What do you plan to machine That X span with a single c beam is just not going to work for anything harder that foam and soft woods. But then...
