Separate names with a comma.
Some features disabled for guests. Register Today.
If you're building a Sphinx, why are you even considering belt?
You will not need external drivers with the gShield, but the max output is 2.5 amps. I'm sure that anything about 1.5 amps would require active...
A belt is faster and cheaper. Well that's it for all of the positives. A lead/ball screw is far more precise. They can be consistently used in...
Have you tried a different interface? Try GRBL panel. Does your computer make any sound when you plug the driver in?
I feel like this machine just can't take the abusive I want to dish out. The wheels just aren't doing it for me. A full 10mm depth contour with...
I'll take a leap of faith and say that you didn't contact them during the weekend for all three of your attempts. Moving past that... Did you...
Nothing seems out of place there, aside from $132, which has nothing to do with this. What motors? What microstepping? What current? What drivers?
Same result with the second. The fuses aren't blowing. I checked the underside of the board. My sniffer doesn't detect anything burnt on the...
What parameters did you use to create that? What machine do you even have?
check my edit. The same idea should apply. I was never a fan of Vetric so I can't directly help you there.
What CAD/CAM are you using? I use SketchUp for planing. Just make a square the size of your spoiler and create a pocket operation. It's that...
The blade fuse did not blow. It has never been through a reverse polarity situation. I figured it was something on the other side of the board...
And the HDPE will cut even smoother. I still haven't gotten a chance to cut Delrin/Acetal. :/ Once you figure out what your machine can do, the...
Thanks. HDPE is probably the most forgiving material I have worked with to date. The ONLY thing you have to watch out for is burring, which...
I didn't sit down and study it so don't take my words as gospel. It did catch me off guard though as I use hdpe for prototyping smaller parts....
Have you had any success solving the issue?
HDPE curls when you remove the skin. Make sure you skin both sides if you stick with it. I chose to use acrylic as a waterproof spoiler.
What kind of cutting? You can cut with a laser. Or do you want to engrave something that you can't cut with a laser? If so, then it's easier to...
So I tried this out. The result was a small pop and that little cloud in the picture. If the old one is blown, then wiring in parallel won't...
I didn't even know they had fuses. Thank you my good sir. Sure enough, the fuses on both dead drivers are blown. Now the question is why? Both...
