Separate names with a comma.
Some features disabled for guests. Register Today.
The pump isn't as strong as I thought it would be. It may be the restriction from the filter, but we'll see how it goes. I built the new limit...
I would consider the Carvey to be a major downgrade. Same for the Nomad. - unsupported rails - gutless spindle - work area of a printer - that...
Also checkout Lakeshore Carbide.
Hold on! Why did your build fail? The X Carve is probably a lesser machine than you were building?
I despise the idea of using belts for linear motion. I equally despise the idea of a moving table. The middle ground (perfect ground for me) was...
That's a good idea. A slight change in my mind, but we'll see how it goes. Thanks Heck no! I'd like to get an aluminum plate with threaded...
The flood tray is in! All I have to do is drill for drains and make small brackets to support the sides of the tray a bit more. It is all held...
I had the pleasure (misery) of using the Shark to cut out the parts for the flood tray. Then I used the Sphinx to cut the strainer mount. I'll...
I was just thinking about something like this today too! Then I said no since it would be another axis that could become shifted. But your z...
I haven't been giving updates here. :( The aluminum tray was the machines first ever cut a few weeks ago. The limit switch mounts were made on...
Speaking for two in ones, I was talking with a buddy of mine and one of the ideas that came up was a printer/router combo. The printer would just...
Once you ditch the 20x80 with belts and go with the CBeam with screws, the price jumps up, but so does the machine as a whole in my opinion. I...
A week or so ago, I was unable to log into my account form my PC. There were very small windows of time where I could log in, but it would time...
Do you mean shaft or profile slides? 80/20 doesn't come in 80x100, but you can get 80x80 and 80x160. C beam is made to fit M8, but can...
It has to be submerged.
Then that video must have had a very bad setup. A submerged pump is silent. The pump must also be rigidly secured to avoid vibration. I came...
What "hurts" is the fact that all of the 220v systems are around $250. The rare 110v is approaching $400. That particular kit comes with a lot...
The cnc world doesn't like us 110v plebs. :(
No way!
I think you'll actually lose a little rigidity since the endmill will have greater torque on the gantry. How much is the question. I should say...
